How to Choose Proper Oil Mill Machinery
Setting up an oil mill plant is indeed a great investment as it returns good profit. But then again, starting one can be very exhausting, especially if you do not know how to choose the right oil mill machinery. As such, let this article guide you.
Before we go deeper into helping you choose, let’s first define what an oil mill is.
Oil Mill Machinery – Defined
An oil mill is basically a building or equipment that is designed to press or crush seeds that contain oil, which will then be processed to extract vegetable oils.1. Identify the raw material to be processed.
There are actually plenty of materials that can be processed to get oil. Peanuts, sunflower seeds, palm kernel, mustard, cotton seed, sesame, flax seed, soybean, corn germ, olives, safflower, and canola are among them. So before you make a decision, be sure you know what specific material you will be processing because each material has a specific requirement that should be met capacity-wise.
2. Be familiar with the processes involved.
Just like any equipment, oil mill machineries are made to perform certain processes, which include cleaning, expelling, flaking, crushing, cooking, pressing, and filtering. Below are two of the most common processes:
- Crushing – This is usually the next step to cleaning. Here, the raw materials are crushed into smaller bits so as to meet the required flaking condition.
- Cooking – In this process, an oilseed is warmed up before pressing. To increase the amount of oil produced, temperature and water are often adjusted.
- Pressing – In oil mill machinery, pressing is considered one of the most important procedures. After pre-treating oil seeds, the material will undergo this process.
- Filtering – When filtering, crude vegetable oils are purified using fine-mesh cloth.
- Refining – This is to get rid of the harmful chemical substances, so that humans can have healthier edible oil.
3. Know the capacity requirements.
Although typical oil mill machinery has a capacity range of 10 to 500 TPD, in most cases, manufacturers can customize. They can design one unit to meet every need of a project.
For instance, the shell of peanuts and cottonseed must be removed before pressing. Sesame, on the other hand, does not involve flaking and crushing prior to pressing. So to be sure and avoid disappointments, ask ahead.
4. Do your task: Research.
Now that you are equipped with all the knowledge you need, it is easier for you to choose oil mill machinery. However, that does not give you the assurance of making a great choice. So do yourself a favor and research. Ask around for others’ opinions. After all, word-of-mouth is the most dependable source of information.
Considering all these procedures, it is safe to say that choosing proper oil mill machinery is never an easy task. Hopefully, the tips presented here could somehow guide and enlighten you to be able to make an informed choice.